3M Command Strips Large Photo Picture Frame Poster Canvas Hanging Damage free
Buy on eBay
Genuine 3M Command Large Strips (Fast & Free Packing and Postage) LOWEST PRICE MADE IN U.S.A
3M Command Damage Free Large Picture Hanging Strips (17206)
Features and Benefits:Great for hanging pictures.Put up and take down pictures and other objects as often as you want, without the fear of marking or damaging walls.Hang picture frames, canvasses, artwork or decorative items - straight & level.Easy to remove - innovative stretch release technology leaves no surface damage.High Performance Adhesive - Holds On Strongly.Easy to put up - no need for nails or screwsOnce applied, pull apart and reattach as often as you like.Each pair includes 1 for wall and 1 for item to attach.Once adhesive bonds, push the two strips together - each pair holds up to 1.8kg.Option: 1 / 2 / 4 / 6 / 8 / 10 / 12 / 16 / 20 sets All supplied in loose to provide different amount you required.Use more than 1 pair of large strips to hold:
1 Set = 1.8Kg (4lbs)
2 Sets = 3.6Kg (8lbs)
4 Sets = 7.2Kg (16lbs)
Product DetailsModel 17206Brand 3M Command™Standards And Specifications each set of strip supports up to 1.8kgRecommended strips per Frame 4 sets - Each set on each corner of Frame. .. .. .
** Please Note this listing is selling by SET not BOX , if you require Pack of 4 sets please select 4 sets. **
1.) First, clean the wall with isopropyl rubbing alcohol by wiping gently. Don't use household cleaners like wipes or sprays because they leave behind a slippery residue.2.) Separate the strips. Press two strips together until they click.
3.) Remove one of the green liners and press onto the frame. Repeat with the other pairs of strips as shown above. Place the lower pair of strips about 2/3 down from the top of the frame. Check your package for the correct weight limits.4.) Remove the remaining liners and press frame on the wall. Press each side of the frame firmly against the wall for 30 seconds.5.) To ensure the adhesive will hold, remove the frame by grabbing the bottom corners and peeling the frame up and away from the wall. Don't pull straight off. Now, press the strips that remained on the wall for 30 seconds. Make sure to press the entire strip. 6.) Wait 1 hour before reattaching the frame. Line up the strips on the frame with the strips on the wall. Press until each pair of strips click and lock in place.
To Remove1.) Remove the frame by grabbing the bottom corners and peeling the frame up and away from the wall. Don't pull straight off.
2.) Remember to never pull the strips towards you or peel from the wall. Always pull straight down as slow as you can.
3.) Slowly stretch the strip straight down, keeping your hand against the wall as you go. Keep stretching up to 15 inches.
Select Royal Mail 1st Class (1 working day) delivery are available(Add to basket first, when checkout select Royal Mail 1st Class)
Q: To what surfaces will Command™ Products stick?
A: Almost any sealed/ painted surface such as painted Gyprock®, stained or varnished wood, painted smooth concrete, glass, ceramic tile and stainless steel.
Q: What surfaces should I avoid using Command™ products on?
A: Unpainted surfaces, rough or porous surfaces like bricks, bare wood, wall paper, plastic surfaces such as vinyl.
Q: Can I use Command™ Products on freshly painted surfaces?
A: Paint should be fully cured. Check paint can for manufacturer's cure time. It is recommended to wait at least 30 days after painting before applying Command™ products. Note that poorly prepared painted surfaces such as poor undercoat, trapped dust, grease and mould could result in the peeling of the painted surface.
Q: Why can't I clean the surface with a household cleaner?
A: Many household cleaners leave behind a very thin layer of residue that affects how strongly the adhesive will bond to the surface. Use Isopropyl Alcohol to clean the surface, available from chemists or local hardware stores. Methylated Spirits is not recommended.
Q: What happens if I pull too hard and the strip breaks?
A: Simply heat up the base plate with a hair dryer to soften the adhesive. Then use dental floss to gently cut through the foam to remove the hook or hanger from the surface. Stretch or peel off the remaining adhesive.Climate and Temperature
Q: Can I use Command™ products in hot climates?
A: Extreme heat conditions may cause the adhesive to eventually deteriorate, resulting in product failure. The adhesive could soften and lose adhesion with temperatures above 40°C.
Q: What about using Command(TM) products in cold climates?
A: You can, but the adhesive should be applied to a clean, smooth surface when the temperature is above 10°C. If the temperature is below 10°C, you can heat the surface with a hair dryer before application.Product Information and Use
Q: What are some possible uses for Command™ Products?
A: Hooks are perfect for closets, lockers, offices, kitchens, laundry rooms, kids rooms, bathrooms, garages, boats and campers. Each package of hooks comes with extra strips so the hooks can be reused or repositioned. Picture Hanging Strips are great for hanging frames on the wall and creating collages and mood walls without wall damage.
Q: Why do I have to wait an hour before hanging an item?
A: The one-hour wait ensures that the adhesive has had enough time to build strong adhesion to the wall or surface.
Q: Can I use more than one hook or 4 sets of Frame hanging strips if I want to hang an item/Frame that's heavier than the weight listed?
A: No. We do not recommend this for our hook products. Weight may not be distributed equally and can result in failure.
Q: Picture Frame won’t stay on the wall?
A: Ensure that you have left at least one-hour before you hang your picture frame. Once you have positioned the frame in initial application, we always recommend that you remove the frame from the wall (grab frame at the bottom and peel off surface) . Once the frame is taken down, then make sure you press firmly on all the strips again for 30 seconds to ensure they are firmly in place (i.e. press on strips on the wall and on the back of the frame). Wait one hour before rehanging picture (to allow the adhesive to bond), and when doing so, listen for the 'click' to ensure the strips are 'locked' in place.
Q: Both sets of Picture Strips come away from the wall after removing frame
A: Ensure strips have been separated along perforations before pairing together. Ensure you have pushed each set of strips firmly through the frame for 30 seconds when first applied. For further information please contact customer information centre on 0800 1218692.